Catskill-craftsmen 1429 User Manual

CRAFTSMEN, INC.Assembly Instructions Model 1429Model 1429A. These units are Ready-To-Assemble. Catskill uses positive fastening methods such as wood s

STEP 5Drawer Assembly1 Lower Drawer Front, 1 Upper Drawer Front, 1 Upper Left Drawer Side, 1 Upper Right Drawer Side, 1 Lower Left Drawer Side, 1 Lowe

STEP 6Top Assembly1 Table Top, 4 Cutting Board Slats, 4 Cutting Board Rails 1. Lay the Table Top upside-down on a smooth fl

STEP 71 Main Assembly, 1 Assembled Upper Drawer, 1 Assembled Lower Drawer, 1 Assembled Top, 1 Middle Shelf1. Now tap in 1” pins into the middle brac

STEP 81 Main Assembly, 2 Cutting Boards1. Slide the 2 Cutting Boards Into the sides to complete the assembly processFinishing Touches Part 2ILLUSTRA

For continued beauty and long life of your Catskill Craftsmen cart, we recommend Catskill Craftsmen’s Butcher Block Oil. If you would like to purch

(2) Drawer Bottom - 28-1/8” x 18-1/2” x 5.2mmPN: DrBot1429(1) Middle Shelf - 33-5/16” x 18-5/16” x 7/16”PN: MidS1429(2) Side Panel Insert15” x 9-13/16

(2) Front Right/Back Left 30” x 3-1/2” x 3-1/2”PN: FRBLleg1429(2) Front Left/Back Right30” x 3-1/2” x 3-1/2”PN: FLBRleg1429(1) Lower Drawer Front29-13

HARDWARE1” Long 3/16” DIA. Steel Pin (8)PN: 1PIN1429 Bastion Set Screw (28) PN: BSS1429Bastion Post (28)PN: BPost1429 Bastion Barrel Nut (28) PN: BNut

WRONG!Post needs to be screwed deeper.WRONG!Post needs to be backed out.CORRECT!Set screw secures post properly.Step 1 1. The Bastion fastening syste

STEP 1Back Assembly1 Front Right/Back left Leg, 1 Front Left/Back Right Leg, 1 Top Back Brace, 2 Mid/Bot Back Brace, 1 Back Panel Insert.1. Tap 3/4”

STEP 2Front Assembly1 Front Right/Back left Leg, 1 Front Left/Back Right Leg, 2 Mid/Top Front Brace1. Tap 3/4” pins into the ends of all the braces.

STEP 3Main Assembly1 Assembled Back, 1 Assembled Front, 2 Top Side Braces, 4 Mid/Bot Side Braces, 4 Drawer Glide Supports, 2 Side Panel Inserts 1. Lay

STEP 4Main Assembly Part 21 Assembled Back, 1 Assembled Front 1. With the back assembly from step 3 in the same position, fit the Assembled Front ont