Catskill Craftsmen 51524 Instruction Manual download pdf (Page 10)

Magnet

5/8” Pan Head Screw

2 Used

in this step

STEP 13

Attach Magnet to Magnet Block

A. Stick magnet to magnet plate on right door.

B. With left door open, close the right door. The magnet should be positioned over the wooden block

on the bottom of the top front brace. Hold the magnet in place with your thumb, and open the right

door. The magnet will be in the correct position on the block. Mark with a pencil.

C. Secure magnet with the two round head screws

in the magnet packet. Center screws in the slot in

the magnet. This will allow adjustment later,

if needed.

Magnet

5/8” Pan Head Screw

2 Used

in this step

Magnet

5/8” Pan Head Screw

2 Used

in this step

ILLUSTRATION 13

STEP 14

Install Casters

A. Insert and tap caster sockets with a

hammer until the teeth grab the wood.

DON’T POUND SOCKET FLAT OR

CASTER SHAFT WILL NOT ENTER.

B. Insert casters and seat by pushing

straight downward with the heel of your

hand, or tap into place with a hammer.

Don’t be afraid to give them a good

downward whack on the solid metal part

of the caster!

Note: Locking wheels usually go on the

front!

ILLUSTRATION 14

1 2 ... 5 6 7 8 9 10 11 12

No comments

Catskill Craftsmen 51524 Instruction Manual Page 10