Catskill-craftsmen 1536 User Manual

CRAFTSMEN, INC.Assembly Instructions Model 1536Cuisine IslandGENERAL: 1. You have purchased model 1536. Overall dimensions of an assembled unit is 31

STEP 12A. Stick magnet to magnet plate on right door.B. With left door open, close the right door. The magnet should be positioned over the wooden blo

STEP 13A. Insert and tap caster sockets with hammer until the teeth grab the wood. DON’T POUND SOCKET FLAT OR CASTER SHFT WILL NOT ENTER.B. Insert cas

For continued beauty and long life of your Catskill Craftsmen cart, we recommend Catskill Craftsmen’s Butcher Block Oil. If you would like to purch

13 13/16”13 3/8”Plain Side Panel (1) Handle Side Panel (1) TOPTOP TOPBack Panel (1) Drawer Bottom (1) Left Door (1) Right Door (1) Table Top (1) Middl

HARDWARE1 3/4” Phillips Flat Head Bolt (8) Cam Posts (2) 1 1/4” Phillips Flat Head #8 Screw (14) 1” Truss Head Machine Screw (6) 5/8” Pan Head Screw (

1 1/4” Phillips Flat Head #8 Screw (12) 4 Used in this step Attach a table top stick to the top of each side panel using 1 1/4” #8screws. The counter

STEP 3 Invert table top on a smooth flat surface and make a large (X) mark over each of the pilot holes in the bottom. Make marks about 1 1/2” long.

STEP 5A. Attach the drawer back to the drawer sides with four 1 1/4” #8 screws. Make sure parts are aligned as in illustration 5A.B. Insert drawer bot

STEP 6 Take drawer, insert the drawer dowel thru the hole in the drawer back, invert drawer and place in cabinet cavity. Insert/turn drawer dowel int

STEP 8A. Take the top front brace ( with magnet block ), insert the pins in the brace ends into the slots on the inside of the front legs and slide do

STEP 9Attach handle/towel bar to side panel with 1 1/4” #8 screws from inside side panel.1 1/4” Phillips Flat Head #8 Screw (12) 2 Used in this stepST