Catskill Craftsmen 54220 Instruction Manual download pdf (Page 4)

STEP 1

A. Tap/insert ONE 1 1/2” pin into each end of all the doors. DON’T OVERDRIVE PINS! Pins should

stick up about 1/2” when seated.

B. Attach the magnet plate (may be stuck to magnet! ) with the 1/2” #4 screw to the top of the doors.

Bumps go toward the wood.

C. Attach door handles with 7/8” truss head machine screws.

STEP 2

A. Take the 2 front braces and tap/insert one 3/4” steel pin into each end of both braces until seated.

About 3/8” will stick out when seated. OK if loose.

B. Insert two 1” pins in bottom brace as shown.

7/8” Truss Head Screw

1/2” #4 Flat Head Screw

5/8” #8

1” Pin

3/4” Pin

The counter sunk hole

goes out so the bumps

go toward the wood.

1 1/2” Pin

Flush at bottom, space at top to clear magnet

Not used Not used

(Included in magnet pack)

Top Front Brace

Insert

Bottom Front Brace

1 2 3 4 5 6 7 8 9 ... 13 14

No comments

Catskill Craftsmen 54220 Instruction Manual Page 4