Catskill-craftsmen 1481 User Manual

CRAFTSMEN, INC.Assembly Instructions Model 1481The Mini Empire IslandREAD ME FIRST!!! Assembly will be much easier if you have two people and a power

Front AssemblySTEP 71 Front Left/Back Right Leg, 1 Left Door, 1 Right Door, 1 Front Right/Back Left Leg, 2 Front/Back Braces, 1 Cutting Board Glide Su

Make sure holes go toward the bottom of the cartNutMain AssemblySTEP 81 Back Assembly, 1 Front Assembly, 3 Mid/Bot Side Braces, 2 Glide Support Braces

Glide AssemblySTEP 9Tap the caster sockets into the holes in the bottom of the leg with a hammer so the teeth bite into the wood, but not too hard. Th

7/16” #6 Flat Head ScrewsTTTTTable Top AssemblySTEP 10 Attach “L” brackets to the Table Top using 7/16” #6 flat head screws. Use round hole in the “L”

Shelf AssemblySTEP 11MSBSEdge Banding goes toward outside Attach “L” brackets to the Table Top using 7/16” #6 flat head screws. Use round hole in the

Finishing TouchesSTEP 12 Pull/extend the metal glides from the cabinet and insert the drawer and the pull out cutting board. Drawer will push in half

For continued beauty and long life of your Catskill Craftsmen cart, we recommend Catskill Craftsmen’s Butcher Block Oil. If you would like to purch

CABINET PARTS(1) Table Top-148130” x 26” x 1” TT(1) Pull Out Cutting Board Top-148022” x 19 1/2” x 3/4” CBTRD(1) Right Door-148122 1/4” x 10 5/32” x 3

BPSPLSPBSMSDB(1) Side Panel-148020 9/16” x 22 5/8” x 1/4”(1) Bottom Shelf-148126 3/8” x 22 3/16” x 7/16”(1) Middle Shelf-148126 3/8” x 21 3/4” x 7/16”

1 1/4” Phillips Flat Head #8 Screw (8) 3/4” Long 3/16” DIA. Steel Pin (24)5/8 Wooden Disk (12) 10-24 Hex Nut (10) Bastion Set Screw (10) Bastion Post

WRONG!Post needs to be screwed deeper.WRONG!Post needs to be backed out.CORRECT!Set screw secures post properly.Step 1 1. The Bastion fastening syste

Push down on the black tab and pull outGets attached to the Drawer Side Gets attached to the Glide Support BraceSTEP 1 Take all of the glides and det

Slide Out Cutting Board AssemblySTEP 31 Pull Out Cutting Board Top, 1 Cutting Board front, 2 Cutting Board Sides. Lay Pull Out Cutting Board Top on i

B4Bastion Post & Pin AssemblySTEP 54 Legs, 4 Front/Back Braces, 3 Mid/Bot Side Braces, 2 Doors, 1 Back Panel, 2 Top Side Braces, 2 Glide Support B

Back AssemblySTEP 61 Front Left/Back Right Leg, 1 Back Panel, 1 Front Right/Back Left Leg, 2 Front/Back Braces, 1 Cutting Board Glide Support Attach t