Catskill-craftsmen 51536 User Manual

Assembly InstructionsModel 51536Mid-Size Two Door CartGENERAL:1. You have purchased model 51536. 2. Should you need assistance or need to replace a da

STEP 11A. Insert and tap caster sockets with hammer until the teeth grab the wood. DON’T POUND SOCKET FLAT OR CASTER SHAFT WILL NOT ENTER.B. Insert ca

For continued beauty and long life of your Catskill Craftsmen cart, we recommend Catskill Craftsmen’s Butcher Block Oil. Our Butcher Block Oil is avai

13 13/16”13 3/8”Plain Side Panel (1)P/N: SP-51536/PL Handle Side Panel (1)P/N: SP-51536/HL TOPTOPTOPBack Panel (1)P/N: BP-51536L Drawer Bottom (1)P/N:

HARDWARE 515361 3/4” Phillips Flat Head Bolt (8) Cam Posts (2) 1 1/4” Phillips Flat Head #8 Screw (12) 7/8” Truss Head Machine Screw (6) 5/8” Phillips

5/8” #7 1 1/4” #85/8” #7 5/8” #7 The glides look almost alike; however, they are stamped CR for cabinet right and CL for cabinet left.Left SideFrontRi

STEP 2A. Lay back panel at on a smooth surface with holes up.B. Decide at this point if you want the handle/towel bar on the right or the left side

STEP 4A. Attach the drawer back to the drawer sides with four 1 1/4” #8 screws. Make sure parts are aligned as in illustration 4A.B. Insert drawer bot

STEP 5Take the 2 front braces and tap/insert one 3/4” steel pin into each end of both braces until seated. About 3/8” will stick out when seated. Ok i

1 1/2” Long 3/16” DIA. Steel Pin 4 used in this step 5/8” Phillips Flat Head #8 Screw 3 used in this step Magnet Plate7/8” Truss Head Machine Scr

1 3/4” Phillips Flat Head Bolt2 Used in this step10-24 Hex Nut 2 Used in this step2 Used in this step3/16” Flat Washer STEP 9A. Install doors by inser