Catskill-craftsmen 1426 User Manual

CRAFTSMEN, INC.Assembly Instructions Model 1426Grand AmericanaModel 1426A. These units are Ready-To-Assemble. Catskill uses positive fastening methods

ASSEMBLE DRAWERSA. Attach the Drawer Back to the Left and Right Drawer Sides with four 1 ¼” #8 Screws. Make sure the slots that run the length of the

8Attach the 4 L-Brackets to the top side braces with 5/8” # 6 screws. Note the orientation of the L-Brackets in Illustration 8A. The single slot side

9Tap the wheel casters into place. Note: It is highly recommended to have a friend assist in setting the cart upright once the casters have been tappe

10INSERT DRAWERSSlide the drawers into place. Your Grand Americana is now ready to use. BUTCHER BLOCK OIL COUPON For continued beauty and long life o

Parts List Model 1426(4) Caster Insert SleevesPart #: CIS1426(2)Left Front / Right Back Leg30” x 2.5” x 2.5”Part #: Leg-1426LFRB(2) Right Front / Left

WRONG!Post needs to be screwed deeper.WRONG!Post needs to be backed out.CORRECT!Set screw secures post properly.Step 1 TIPS ON HOW THE BASTION FASTENI

1Begin assembly by laying out all of the pieces and checking against the parts list on the previous pages.Tap Caster sleeves for the caster wheels int

Front Right LegFront Center BraceFront Bottom BraceFront Vertical BraceFront Left Leg2Tap Caster sleeves into the bottom of the legs. Do Not insert wh

Back AssemblyTop Side BraceCenter Side BraceBottomSide BraceTop Side BraceCenter Side BraceBottomSide Brace3Lay the Back Assembly on a smooth flat sur

Back AssemblyFront Assembly4Upright Back Assembly with Braces, etc. Attached from Step 3. Caster holes in legs should be facing down as shown in Illus

5Attach the Cabinet drawer glides for both bottom drawers and the top drawer to the drawer support sticks using the 5/8” #7 screws. Note: refer to the

Straight on view of cart with front cutaway6Make sure 1” Steel Pins were firmly tapped into place in the pilot holes on each of the center braces in p